Kelley Industrial Sales
 |
|
|
|
|
PLIDCO® Split+Sleeve |
PLIDCO®
Split+Sleeves
are widely used for
making permanent repairs to pipelines- both on and off shore. The
Split+Sleeve is used primarily for permanent repairs on high and low
pressure and temperature pipelines carrying oil, gas, steam, chemical
process and water. Uniquely engineered, these products allow for repairs
while the line remains operational.
PLIDCO® Split+Sleeves are designed for
fast, easy installation. Patented steel GirderRings hold PLIDCO®
factory-installed packing in place to prevent displacement during
installation. Once the PLIDCO® Split+Sleeve is bolted in place, the seal
is complete. If required the
Split+Sleeve may be
welded to the pipeline while operational. All PLIDCO® Split+Sleeves are
designed so they can be seal welded unless otherwise specified.
The PLIDCO® Split+Sleeve can be used to
couple pipe if sufficient end restraint is provided such as with a PLIDCO®
Clamp+Ring.
The PLIDCO® Split+Sleeve has no end restraint rating in its un-welded
condition.
Standard
working pressure is 1000 psig. Fittings are tested to 1-1/2 times
recommended working pressure. Available from stock in
API pipe sizes 1-1/2”
through 48”.
Higher
working pressures, longer lengths and other sizes available on request.
Buna-N packing is standard, other packing materials available
Major Pros:
Patented steel BriderRings
Line remains operational during installation
Fast & easy installation
Can be seal-welded if required
Information courtesy: The Pipeline Development Company, PLIDCO®
|
|
|
|
|
|
|
|
|
|
|
|
© 1997 - 2014 Kelley Industrial Sales Incorporated, All Rights Reserved